How to Make a Hydrostatic Lawn Mower Faster? Explained with Tips & Tricks

How to Make a Hydrostatic Lawn Mower Faster at Home: Hydrostatic Lawn Mowers work excellent for mowing. But over time, they tend to get slower. To get the best output, you should try making it faster. Yes, it’s possible to do it at home. Here, in this article, we’ll tell you how to make a hydrostatic Lawn Mower faster.

A hydrostatic Lawn Mower uses fluid to transmit power from the engine to the wheel. It’s easy to maintain and lasts longer than traditional mowers that use belts. By making the mower faster, you can do a lot of work in a minimal time. Hence, read the full article to know how to make a hydrostatic Lawn Mower go faster.

How to Make a Hydrostatic Lawn Mower Faster?

 

 

Among many ways, the best is to adjust the control lever. So, we’ll explain this method step-by-step first. After that, we will also provide you with some maintenance tips that will help you to make the mower faster.

Follow the steps below to make your hydrostatic Lawn Mower faster than before:

Step 1: Preparation

First, you have to prepare the Lawn Mower for fixing. Before starting, get a socket wrench. It will be required during the process. Now remove the whole casing of the mower.

Mainly you’re going to work with the control lever usually positioned on the right side. But if you completely remove the top casing, you can clean it too.

Don’t rush while uncasing. Proceed slowly and carefully to ensure you’re doing well. If you rush, you may damage any parts or hurt yourself.

Step 2: Remove the Nut Bolt

 

 

Now locate the nut under the control lever. You should find it on the right side of the mower. Besides, you also can use the user manual of the mower to locate the nut faster.

Once you’ve found the nut, remove it using the wrench. After removing it, keep it aside and move on to the next step.

Step 3: Adjust the Control Lever

Now you have adjusted the side lever to make your hydrostatic Lawn Mower faster. This is very easy to do. Tilt the lever to the backside. It will require some pressure. But don’t force it, or you can damage the control lever.

Remove the governor too. It limits the speed of the mower for safety. So, if you remove it, you can run the mower at the fullest speed.

After you’ve adjusted it, set the nut bolt again with the wrench. This will make the mower move faster.

Step 4: Reinstall the Casing

You’ve successfully completed doing the main part. Now all you have to do is reinstall the casing. You already removed it a few moments ago. So, now you know which part goes where.

[Tip: Before reinstallation, wash all the parts. It will give your hydrostatic Lawn Mower a fresh look.]

Step 5: Start Mowing to Check

After setting everything up, time to check the Lawn Mowers. Get it on the lawn, sit on it, and start. Speed up the machine to see how fast you can go.

You’ll notice that the Lawn Mower is moving slightly faster than before. However, there are few more things you can do to make the Lawn Mower faster.

Hydrostatic Lawn Mower Maintenance Tips to Keep it Fast

Often, for a long time of usage, hydrostatic Lawn Mower gets slower. Some people also don’t take care of the mower well.

So, you also can try doing the following things to make the hydrostatic Lawn Mower faster:

• You can upgrade the tires to a larger side. Usually, you may not look at the tires unless they have got wasted. But if you use larger size tires, it will cover more ground at the same time.
• While riding, you can remove some extra parts to make the mower fast. Hood, tow hitch, and cutting deck are some of the items you can remove while mowing.
• Hydrostatic Lawn Mowers use oil to operate. Use high octane oil for a better speed. You also can use cleaner oil if you want. Besides, if the oil is in the tank for a long time, replace them with new oil.

These are some of the things you can do to make the Lawn Mower go faster.

Conclusion: How to Make a Hydrostatic Lawn Mower Faster?

We’ve covered everything on how to make a hydrostatic Lawn Mower faster. Whether you want to make your mower faster or not, follow the maintenance tips above. They will help you to keep the mower in good condition for a long time. We hope now you can get the mowing work done in less time. If you have any queries regarding the hydrostatic Lawn Mower, feel free to ask us.

FAQs

Can you adjust a hydrostatic transmission?

Hydrostatic transmission refers to the control lever or pedals in the mower. You can easily expose the part where it’s located and then adjust it. Use a wrench to loosen the bolt and then adjust easily. It makes your hydrostatic Lawn Mower go faster.

Can you spray water on a hydrostatic Lawn Mower?

Yes, there’s no problem with cleaning your hydrostatic Lawn Mower by spraying water. However, you should avoid the engine. If water gets inside, it may weaken the engine.

Why does my hydrostatic transmission won’t move?

The most common reason why you can’t move the hydrostatic transmission is the use of old fluid. So, replace it with new fluids to help the transmission moving.